Architectural

The construction of the new 3-story single family residence (3,960.00 SQ. FT.) attached garage (660.00 SQ. FT.), a front porch (155.00 SQ. FT.) and a bbq area (1,000.00 SQ. FT.)

Architectural

The project consists of the construction of proposed

new single family residence of 3,449.00 sq. ft. with

proposed attached 3 car garage of 866.00 sq. ft. ,

proposed porch of 148.33 sq.ft., proposed front cover

patio of 98.00 sq. ft. (trellis ) and rear cover patio of

365.83 sq. ft.

Architectural

Request approval from the city of ontario to build a 6 unit apartment

complex. apartment complex consist of 4 units with 3 bedrooms 2- 1/2

bathrooms and a 2 car garage, and 2 units with 2 bedrooms, 2-1/2

bathrooms, and 2 car garage. complex will come with a bbq & play ground area for residents along with a private open space in the back of each unit.

Construction

The project consists of the construction of 5,200 sq. ft. wood framed building for a retail center. the proposed building will be situated on 22,215 sq. ft. lot (approx 0.50 acres). the site will include the improvements including, the construction of a new parking lot of approximately 11,953 sq. ft. , the installation of new parking light pole lights including the pole foundations, the installation of landscaping and irrigation and finally the construction of a trash enclosure.

Architectural

These Plans are seeking the approval for the construction of a new single family dwelling, 2-story 2,128.00 SQ FT. Total living space (1fst floor = 850.00 SQ FT and 2nd floor = 1,278.00 SQ FT ) with a 2-car garage 433.00 SQ FT and front porch 50.00 SQ FT

Construction

The scope is requesting the approval from the city of palm desert

to build a new addition to existing single family residence of room

addition 260.00 sq. ft. ,kitchen expansion 212.50 sq. ft. new front

porch 120.00 sq. ft., a new cover patio 152.00 sq.ft., and new carport

addition 187.00 sq.ft. (convert existing carport in 2 car garage.)

Engineering

Tenant improvements include demolition of non-bearing partitions walls to existing building and the addition of new non-bearing partitions walls for a new design of the boilermaker office and trade school. also, the improvements include improve installation of the mechanical system (ac/heater), new installation of plumbing fixtures and pipes,and upgrade the electrical installations to accommodate office expansion new welding booths.

construction

The main building will be used as an office to provide administrative and support functions, including distributor operations, and customer service operations, among others for the sale of light duty and medium duty trucks used for local deliveries to businesses and residences, i.e. box trucks, delivery trucks, moving trucks and multi-stop trucks. the ancillary truck storage building will be used as a storage for some of the inventory trucks to prevent weather exposure damage, caused by rain, sun, dust, etc. there will be no repairs, maintenance, and washing of vehicles on site as this use is purely for retail. the proposed business will have a full time staff of 4 employees. daily trips will be limited to only vehicles on site being sold and escorted off the premises for customers themselves or the occasional replenishment of trucks that need to come to the site. this would not impact la cadena drive exponentially hours of operation

Architectural

The project consists of the construction proposed new single family residence of 2,520.00 SQ FT with proposed attached 2 car Garage  and laundry of 1,250.00 SQ FT. 2nd story uncover balcony of 320.66 SQ FT proposed porch entry of 116.00 SQ FT proposed front cover patio of 455.00 SQ FT and rear cover patio of 630.00 SQ FT. 

Architecture

Request approval from the city of corona to build a 6 unit apartment

complex. apartment complex consist of building "a" with 3 units, each unit with 2 bedrooms 2- 1/2 bathrooms and a 2 car garage, and building "b" with 3 units, each unit with 2 bedrooms, 2-1/2 bathrooms, and 2 car garage. complex will come with a bbq & play ground area for residents along with a private open space in the back and 2 balconies of each unit.

Construction

The project consists of the construction of 4,736.50 sq. ft. wood framed building for a retail center. the proposed building will be situated on 15,000 sq. ft. lot (approx 0.34 acres). the site will include the improvements including, the construction of a new parking lot of approximately 8,016.00 sq. ft. , the installation of new parking light pole lights including the pole foundations, the installation of landscaping and irrigation and finally the construction of a trash enclosure.